Since 1974, Captive Fastener Corporation has been solely dedicated to manufacturing the finest quality self-clinching fasteners for a variety of industrial and electronics equipment produced by major OEMs.
All Captive self-clinching fasteners conform to industry standards, which enables them to be fed through all standard automatic insertion equipment, and provide a substitute for form, fit and function.
CHTS Studs for Thin Stainless Steel
| Series | Cross. Ref* | Material | Finish |
| CHTS | FH4 | 400 SeriesStainless Steel | Passivated |
Captive Series CHTS Studs provide a strong, flush-head assembly in stainless steel sheet material as thin as .040 in. (1.0 mm). The heat-treated 400 Series stainless steel studs may be installed with a standard shop press and provide high torque-out and pushout performance in materials with a Rockwell Hardness of B-92 or less.
Self-clinching nuts provide a strong female thread in panels that are too thin to be conventionally tapped. They are installed by placing them in properly pre-cut holes in sheets and applying enough force for metal to cold flow into an undercut.
Self-Clinching Nuts
Types of Self-Clinching Nuts Available at TCH:
- CFAS,CFAC: Floating Nuts
- CFFS; Floating Locking Nuts
- CFSP: Nuts for Stainless Steel
- CFB/CFBS: Blind Press Nuts
- C/CS, CA: Steel and Stainless Steel Nuts
Self-Clinching Studs
Types of Self-Clinching Studs Available at TCH:
- CH S/A: Self-Clinching Flush Head
- HCH S/B: Self-Clinching, High Torque
- HCW: Self-Clinching, Wide Head
- TCH/S: Self-Clinching, Thin Sheet
Standoffs
Standoffs are used in applications that require mounting, spacing or stacking panels, boards or components. These standoffs are pressed into pre-cut round holes and pressed with parallel squeezing force.They can mount permanently to sheets as thin as 0.025"/0.63mm.
Types of Self-Clinching Standoffs Available at TCH:
- CFSO S/A, CFBSO S/A:Self-Clinching
- CFSOSG, CFSOAG: Self-Cinching, Grounding
- CF40, CF40S: Miniature Self-Clinching
- CFSKC: Self-Clinching Slide-Top
- CFMS: Male Self-Clinching
Pins and Other hardware
Self-clinching pins are ideal for compact electronic assemblies. These pins are easily installed by squeezing them into a properly sized hole in a sheet. With applied force, the metal will cold flow and clinch them permanently into place. They can be installed into a variety of hardness (HRB 92/ HB195).
Types of Self-Clinching Pins and other hardware Available at TCH:
- CKF 2/S2/E/SE/FH/FB3:
PCBs (Broaching Type Fasteners) - CFWN/S: Weld Nuts
